P series

Product Image

LIFTON MAGNETS NEOLIFTER P SERIES

In the series of LIFTON LIFTERS are the Neodymium (NdFeB) permanent magnet based Neolifters P Series. All LIFTON lifting magnets are simple to operate and almost maintenance free. High quality and durable materials are used for manufacture of these lifters. The P series has been improved by changing into the single hand operating handle which allow quick lock and release of our lifter.


POINTS TO NOTE

In spite of the excellent properties of LIFTON Lifters, when working with the permanent magnet range a few points must be noted.


SURFACE CORROSION OF WORKPIECE

There is a reduction in the lifting capacity when the surface of the material is painted or coated as the pole plate cannot come in direct contact with the ferrous surface. This distance is called the air-gap. The air-gap size determines the lifting capacity.


SAFETY FACTOR

LIFTON strictly adheres to a safety factor of at least 3:1 for all lifting magnets.


PROPERTIES AND DIRECTIONS OF USE

While the surface condition i.e. the area of contact is very important, in general; a smooth flat surface is good enough. The magnet should always be hung from the centre of the job i.e. used in equilibrium as far as possible.



 
Back to top